NITEEN RAJPUT

99.99% pure titanium, platinum-coated

Medical-grade titanium — the toughest, most stable material for electrolysis — finished with a platinum coating that keeps performance steady for years.

Solid hybrid, not mesh

Some ionizers use mesh plates, some plain solid ones. Wellwa uses solid hybrid plates: more active surface, higher dissolved hydrogen, stronger antioxidant potential — in short, a better antioxidant water.

65 × 156 mm — built long on purpose

Longer than the top imported models' plates (156 mm vs 135 mm). Water travels further along the plate, so ions separate more completely — and the water gets the light, 'micro-clustered' feel ionized water is known for.

5, 7 or 8 plates

Aura, Aura Plus and Aura Maxx — more plates, more stable output across every water mode.

pH — without chemicals

Because ions separate so completely along the long plate path, Aura reaches pH 11.0 on the alkaline side and 3.0 on the acidic side by electrolysis alone — no salts, no additives.

ORP — antioxidant potential

Oxidation-reduction potential, in millivolts. Tap water reads about +200 to +400 mV. Wellwa water reads down to −750 mV (Aura) and −850 mV (Aura Maxx) — the water gives electrons rather than takes them.

Dissolved hydrogen

Up to 1,500 – 1,800 ppb depending on model. Published values are machine maximums — your source water, temperature and flow shape daily output, which is exactly why we test with your own water at the demo.

pH calibration

Water is different in every city — even every street. Calibrate the machine to your own supply, so every mode delivers the pH it promises in your kitchen, not just in a lab.

Auto pH control

Most Indian homes install the ionizer after an RO, and RO output TDS keeps drifting. Wellwa reads the incoming TDS and adjusts ionization automatically — so your drinking water stays at the pH you set, day after day.

No inbuilt filter to replace

Pre-filtration is chosen for your source water and sits outside the machine — nothing inside to clog or replace, so maintenance stays low.

Diagnosed before the visit

Service is the real challenge in India — not everyone can maintain a water ionizer. With Wi-Fi and the Wellwa app, our team sees the machine's status remotely and knows the exact issue before an engineer is sent. Often it is resolved without a visit at all.

Your machine, on your phone

Start, stop and switch water modes from anywhere; see connection status, operating state and care alerts at a glance.

Always improving

OTA-ready firmware — supported updates arrive over Wi-Fi.

Works without Wi-Fi too

Every core function stays on the machine itself; the app adds convenience, not dependency.

Lifetime free IoT service

Remote diagnostics and connected care are free for the life of the machine.

1. We study your water first

TDS, hardness, minerals and existing filtration are reviewed before anything is installed — great output starts with understanding your source water.

2. The right pre-filtration

Chosen for your actual water, so the plates always receive clean, balanced input.

3. Controlled electrolysis

Platinum-coated titanium plates split the stream into alkaline drinking water and useful acidic water — the heart of the machine.

4. Choose your water

One touch selects a calibrated mode — drinking, cooking, produce cleaning, beauty or natural water.

5. Self-care built in

The E-Clean workflow, flow monitoring and care alerts keep the machine performing like day one.

Physical setup

Placement, plumbing, power, inlet conditions, drainage and any required pre-filtration.

Every water mode

Which mode is intended for drinking, cooking, beauty use, produce cleaning and machine care.

App pairing

Account setup, 2.4 GHz Wi-Fi pairing, available remote functions and alert meanings.

Care and escalation

Cleaning, filter or consumable guidance, warranty documents and the authorised service route.